Double Gimbal Lateral Bellows Expansion Joint
Introduction to the universal Gimbal bellows
The combined corrugated tube with universal gimbal can compensate the axial displacement, angular displacement and lateral displacement in any plane of the pipeline, and is generally used to absorb or compensate the axial displacement of the pipeline. If a small amount of radial displacement is really needed in the piping system, it can also absorb the combination of axial displacement, angular displacement and any three directions.The universal gimbal combination bellows are used in two or three pairs and can absorb the deformation amount in the three-dimensional direction.
Product function of universal Gimbal combination bellows
1. Compensation absorption pipeline axial, transverse and angular thermal deformation.
2. Absorb equipment vibration to reduce the influence of equipment vibration on the pipeline.
3. Absorb the deformation amount of the pipeline caused by earthquake and sinkhole.
Precautions for installation of universal Gimbal combination bellows
1. Chlorine ion content of the medium is less than or equal to 25PPM.
2. It is strictly prohibited to splash the bellows with welding slag.
3. It must be installed according to the direction of products.
4, both ends of the bellows must be reasonably set guide support and fixed support.
5. The deformation of ripple compensator is not allowed to forcibly adjust the installation error of piping position.
6, do not use the installation of tie rod or limit rod lifting.
7. After installation, the transport tie rod and the limit tie rod marked with yellow shall be removed.
Product Tags:
|
|
Piping Systems Double Gimbal Expansion Joint For Absorb Angular Movements Images
|
